Performance.CUT

Performance.CUT by IMA for effective cutting with minimum space requirements combines the advantages of nesting with the speed of sawing.

For efficient cutting of small batches, IMA has adapted the powerful and proven technology of the BIMA Cutting Centre for use in a new, more compact machine. The Performance.CUT offers optimal processing of pre-cut parts in the smallest space and is therefore a very attractive proposition with regard to acquisition costs.

  • Optimised space requirements with maximum performance
  • Flexible cutting even with small quantities – effective and efficient
  • Automatic tool change during operation
  • Exceptional potential for savings as no sacrificial boards are required
  • Nested cutting plans possible
  • approx. 800 up to over 1500 parts/shift depending on the cutting plan
  • excellent quality of parts because they are permanently held by the work-holding devices until completely separated.

Processing units

Highlights - Performance.CUT

  • Feed system designed as a brush table
  • Insertion using 4 independent clamps
  • Clamping system with three independent "mushrooms"
  • 10 kW (S6) milling spindle, vector-controlled, air-cooled
  • Integrated extraction (above and below floor)
  • Moving 8-way tool changer
  • Upper pressure beam integrated into the machine bed
  • Optional integrated chip disposal belt
  • Centring system with independent servo axes in X-and Z-directions
  • Output system configured as a brush table
  • Extraction table configured as a brush table
  • Mobile control console with integrated operating system
  • IMA cutting pattern optimisation
  • Open data import interface for external software
  • Work list management
  • Raw panel dimensions 2800 x 2200 mm
  • Min finished part dimensions 100 x 205 mm
  • Max finished part dimensions 2800 x 2200 mm
  • optimal flow of parts when the cell is integrated into a processing plant
  • When parts are manually taken out of the cell, residual parts can also be fed from the front – without reaching into the stock, for fast and flexible manufacturing and the possibility of making „quick fixes“ without reaching into the whole system
Extraction2 x Ø 120 mm; v = 28 m/sec;
38 cbm/min
Transport and working height960 mm +/-50 mm
X 1 axis80 m/minprocessing axis
Y 1 axis80 m/minrack gear
Z1 axis40 m/minhight adjustment for milling spindle (ball screw spindle)
Panel sizez: 8 – 40 mm
max. 2800 mm x 2800 mm (2200 x 2800 mm / 2200 x 2200 mm / 2200 x 6300mm)
min. 500 mm x 1000 mm
Workpiecemin. 100 mm x 205 mm
max. 2800 mm x 2800 mm
Wasteup 500 mm x 1000 mm (smaller possible)